migrate

ArrStack/.env

@@ -0,0 +1,150 @@
+# ============================================================
+# Tom Spark's ARR Stack — Environment Configuration
+# https://github.com/loponai/arrstack
+#
+# INSTRUCTIONS:
+#   1. Copy this file:  cp .env.example .env
+#   2. Fill in your VPN credentials below
+#   3. Adjust timezone and user IDs if needed
+#   4. Run:  docker compose up -d
+# ============================================================
+
+# ============================================================
+# SYSTEM SETTINGS
+# ============================================================
+
+# Your timezone (list: https://en.wikipedia.org/wiki/List_of_tz_database_time_zones)
+TZ=America/New_York
+
+# Your Linux user/group ID. Find yours with: id
+# Most systems default to 1000. If yours is different, change these.
+PUID=1000
+PGID=1000
+
+# ============================================================
+# VPN SETTINGS — Pick your provider and fill in credentials
+# Full provider list: https://github.com/qdm12/gluetun-wiki/tree/main/setup/providers
+#
+# IMPORTANT: VPN credentials are NOT your login email/password!
+# You need service credentials from your VPN provider's manual
+# setup or API section. See the provider examples at the bottom of this file.
+# ============================================================
+
+# Your VPN provider (surfshark, nordvpn, protonvpn, airvpn, mullvad, private internet access, windscribe, etc.)
+VPN_SERVICE_PROVIDER=airvpn
+
+# Protocol: wireguard (recommended, faster) or openvpn
+VPN_TYPE=wireguard
+
+# --- WIREGUARD CREDENTIALS ---
+# For Surfshark: go to https://my.surfshark.com/vpn/manual-setup/main → WireGuard
+# For other providers: see the examples at the bottom of this file
+WIREGUARD_PRIVATE_KEY=eDgf3GPFy2ltgx2RkD/Vx5wKZ4dVi28YbQmSJOrbWmk=
+WIREGUARD_ADDRESSES=10.175.23.30
+# Only needed for some providers (AirVPN). Leave blank if not required.
+# WIREGUARD_PUBLIC_KEY=
+WIREGUARD_PRESHARED_KEY=+0+hrSdzRUxKDNk1Q37PNmNJ2jsj2EzF45JtbZad4lI=
+# --- OPENVPN CREDENTIALS ---
+# Only needed if VPN_TYPE=openvpn. Leave blank if using WireGuard.
+# OPENVPN_USER=
+# OPENVPN_PASSWORD=
+
+# --- SERVER SELECTION ---
+# Pick a country close to you for best speeds
+SERVER_COUNTRIES=Canada
+
+# --- PORT FORWARDING ---
+# Supported by: ProtonVPN, AirVPN, PIA. Can help with upload speeds and seeding.
+# Not required for downloading. Most users don't need this.
+# Set to "on" if your provider supports it, leave blank otherwise (Surfshark, NordVPN, etc.).
+#VPN_PORT_FORWARDING=
+# If your provider requires manually specifying a port (e.g. AirVPN):
+FIREWALL_VPN_INPUT_PORTS=29261
+
+# ============================================================
+# NETWORK — Static IPs for each service
+# You shouldn't need to change these unless you have a conflict.
+# ============================================================
+IP_GLUETUN=172.39.0.2
+IP_RADARR=172.39.0.3
+IP_SONARR=172.39.0.4
+IP_LIDARR=172.39.0.5
+IP_BAZARR=172.39.0.6
+IP_JELLYFIN=172.39.0.7
+IP_SEERR=172.39.0.8
+IP_AUDIO=172.39.0.9
+IP_NAVI=172.39.0.10
+IP_LIST=172.39.0.11
+IP_WATCH=172.39.0.12
+# ============================================================
+# PROVIDER-SPECIFIC EXAMPLES
+# Uncomment and fill in the section for your VPN provider.
+# ============================================================
+
+# --- NORDVPN ---
+# 1. Go to: https://my.nordaccount.com/dashboard/nordvpn/manual-configuration/
+# 2. Generate a WireGuard private key (NordLynx)
+# 3. Paste the private key below
+# VPN_SERVICE_PROVIDER=nordvpn
+# VPN_TYPE=wireguard
+# WIREGUARD_PRIVATE_KEY=your_nordvpn_private_key_here
+# WIREGUARD_ADDRESSES=10.5.0.2/16
+# SERVER_COUNTRIES=United States
+# --- PROTONVPN ---
+# 1. Go to: https://account.protonvpn.com/ → Downloads → WireGuard configuration
+# 2. Generate a config, open the file, copy the PrivateKey and Address
+# 3. Port forwarding is supported on paid plans
+# VPN_SERVICE_PROVIDER=protonvpn
+# VPN_TYPE=wireguard
+# WIREGUARD_PRIVATE_KEY=your_proton_private_key_here
+# WIREGUARD_ADDRESSES=10.2.0.2/32
+# SERVER_COUNTRIES=United States
+# VPN_PORT_FORWARDING=on
+
+# --- SURFSHARK ---
+# 1. Go to: https://my.surfshark.com/vpn/manual-setup/main
+# 2. Get WireGuard credentials
+# VPN_SERVICE_PROVIDER=surfshark
+# VPN_TYPE=wireguard
+# WIREGUARD_PRIVATE_KEY=your_surfshark_private_key_here
+# WIREGUARD_ADDRESSES=10.14.0.2/16
+# SERVER_COUNTRIES=United States
+
+# --- AIRVPN ---
+# 1. Go to: https://airvpn.org/ → Client Area → Config Generator
+# 2. Select Linux → WireGuard → pick a server → Generate
+# 3. Copy all keys and the assigned IP
+# VPN_SERVICE_PROVIDER=airvpn
+# VPN_TYPE=wireguard
+# WIREGUARD_PRIVATE_KEY=your_airvpn_private_key_here
+# WIREGUARD_PUBLIC_KEY=your_airvpn_public_key_here
+# WIREGUARD_PRESHARED_KEY=your_airvpn_preshared_key_here
+# WIREGUARD_ADDRESSES=your_assigned_ip/32
+# FIREWALL_VPN_INPUT_PORTS=your_forwarded_port
+# VPN_PORT_FORWARDING=on
+
+# --- MULLVAD ---
+# 1. Go to: https://mullvad.net/en/account → WireGuard configuration
+# VPN_SERVICE_PROVIDER=mullvad
+# VPN_TYPE=wireguard
+# WIREGUARD_PRIVATE_KEY=your_mullvad_private_key_here
+# WIREGUARD_ADDRESSES=your_assigned_ip/32
+# SERVER_COUNTRIES=United States
+
+# --- Watchtower ---
+WATCHTOWER_CLEANUP=true
+WATCHTOWER_INCLUDE_RESTARTING=true
+WATCHTOWER_ROLLING_RESTARTING=true
+WATCHTOWER_SCHEDULE=0 0 4 * * *
+WATCHTOWER_INCLUDE_STOPPED=true
+WATCHTOWER_NOTIFICATIONS=email
+WATCHTOWER_NOTIFICATIONS_HOSTNAME=Docker-Deply  # Add Server Name or IP Address
+WATCHTOWER_NOTIFICATION_EMAIL_FROM=miker@mmcfetridge.net
+WATCHTOWER_NOTIFICATION_EMAIL_TO=miker@mmcfetridge.net
+WATCHTOWER_NOTIFICATION_EMAIL_SERVER=mail.mmcfetridge.net
+WATCHTOWER_NOTIFICATION_EMAIL_SERVER_PORT=465
+WATCHTOWER_NOTIFICATION_EMAIL_SERVER_USER=miker@mmcfetridge.net
+WATCHTOWER_NOTIFICATION_EMAIL_SERVER_PASSWORD=!Sucyetat123
+WATCHTOWER_NOTIFICATION_EMAIL_DELAY=2
+PUID=1000
+PGID=1000

ArrStack/docker-compose.yml

@@ -0,0 +1,444 @@
+# Tom Spark's ARR Stack — Automated Media Server
+# https://github.com/loponai/arrstack
+#
+# Comment this out if you are not deploying this through Gitea CI/CD process. 
+#  echo "Setting up directory nd ownership"
+# Create the directory if it doesn't exist yet
+#  sudo mkdir -p /opt/Docker-Deployments
+# Usage:
+#   1. Copy .env.example to .env and fill in your VPN credentials
+#   2. Run: bash setup-folders.sh
+#   3. Run: docker compose up -d
+#
+# All VPN-protected services (qBittorrent, Prowlarr, FlareSolverr) run
+# through Gluetun. If the VPN drops, traffic stops. Zero leaks.
+#
+# Radarr, Sonarr, Lidarr, Bazarr, Jellyfin, and Seerr do NOT run through
+# the VPN — they need direct network access for speed and local connectivity.
+
+networks:
+  arrnetwork:
+    name: arrnetwork
+    ipam:
+      config:
+        - subnet: 172.39.0.0/24
+
+services:
+
+  # ============================================================
+  # GLUETUN — VPN Container (kill switch + tunnel)
+  # All VPN-protected services route through this container.
+  # Ports for those services are mapped HERE, not on the services themselves.
+  # Docs: https://github.com/qdm12/gluetun-wiki
+  # ============================================================
+  gluetun:
+    image: qmcgaw/gluetun:latest
+    container_name: gluetun
+    cap_add:
+      - NET_ADMIN
+    devices:
+      - /dev/net/tun:/dev/net/tun
+    networks:
+      arrnetwork:
+        ipv4_address: ${IP_GLUETUN}
+    ports:
+      - 8000:8000     # Gluetun Control Server
+      - 8080:8080     # qBittorrent WebUI
+      - 6881:6881     # qBittorrent torrenting port
+      - 6881:6881/udp
+      - 9696:9696     # Prowlarr
+      - 8191:8191     # FlareSolverr
+    volumes:
+      - gluetun_volume:/gluetun
+    environment:
+      - VPN_SERVICE_PROVIDER=${VPN_SERVICE_PROVIDER}
+      - VPN_TYPE=${VPN_TYPE}
+      # --- WireGuard credentials (most providers) ---
+      - WIREGUARD_PRIVATE_KEY=${WIREGUARD_PRIVATE_KEY}
+      - WIREGUARD_ADDRESSES=${WIREGUARD_ADDRESSES}
+#      - WIREGUARD_PUBLIC_KEY=${WIREGUARD_PUBLIC_KEY}
+      - WIREGUARD_PRESHARED_KEY=${WIREGUARD_PRESHARED_KEY}
+      # --- OpenVPN credentials (if using OpenVPN instead) ---
+#      - OPENVPN_USER=${OPENVPN_USER}
+#      - OPENVPN_PASSWORD=${OPENVPN_PASSWORD}
+      # --- Server selection ---
+      - SERVER_COUNTRIES=${SERVER_COUNTRIES}
+      # --- Port forwarding (ProtonVPN, AirVPN, PIA) ---
+#      - VPN_PORT_FORWARDING=${VPN_PORT_FORWARDING}
+      - FIREWALL_VPN_INPUT_PORTS=${FIREWALL_VPN_INPUT_PORTS}
+      - FIREWALL_OUTBOUND_SUBNETS=192.168.0.0/22
+      # --- General ---
+      - PUID=${PUID}
+      - PGID=${PGID}
+      - UMASK=002
+      - TZ=${TZ}
+      - BLOCK_MALICIOUS=off
+      - HTTP_CONTROL_SERVER_ADDRESS=:8000
+      - HTTP_CONTROL_SERVER_LOG=on
+      - HTTP_CONTROL_SERVER_AUTH_DEFAULT_ROLE={"auth":"none"}
+    healthcheck:
+      test: wget -qO /dev/null http://127.0.0.1:9999 || exit 1
+      interval: 20s
+      timeout: 10s
+      retries: 5
+    restart: unless-stopped
+
+  # ============================================================
+  # QBITTORRENT — Torrent Client (runs through Gluetun VPN)
+  # ALL traffic goes through the VPN tunnel. No direct internet.
+  # ============================================================
+  qbittorrent:
+    image: lscr.io/linuxserver/qbittorrent:latest
+    container_name: qbittorrent
+    network_mode: service:gluetun
+    depends_on:
+      gluetun:
+        condition: service_healthy
+        restart: true
+    labels:
+      - deunhealth.restart.on.unhealthy=true
+    environment:
+      - PUID=${PUID}
+      - PGID=${PGID}
+      - UMASK=002
+      - TZ=${TZ}
+      - WEBUI_PORT=8080
+      - TORRENTING_PORT=${FIREWALL_VPN_INPUT_PORTS}
+    volumes:
+      - qbittorrent_volume:/config
+      - /data:/data
+    healthcheck:
+      test: wget -q --spider http://localhost:8080 || exit 1
+      interval: 60s
+      timeout: 10s
+      retries: 3
+      start_period: 20s
+    restart: unless-stopped
+
+  # ============================================================
+  # DEUNHEALTH — Auto-restarts unhealthy containers
+  # If qBittorrent loses VPN connection, this restarts it automatically.
+  # ============================================================
+  deunhealth:
+    image: qmcgaw/deunhealth
+    container_name: deunhealth
+    network_mode: none
+    environment:
+      - LOG_LEVEL=info
+      - HEALTH_SERVER_ADDRESS=127.0.0.1:9999
+      - TZ=${TZ}
+    volumes:
+      - /var/run/docker.sock:/var/run/docker.sock
+      - deunhealth_volume:/config
+    restart: always
+
+  # ============================================================
+  # PROWLARR — Indexer Manager (runs through Gluetun VPN)
+  # Manages torrent/usenet indexers. Syncs to Radarr/Sonarr/Lidarr.
+  # ============================================================
+  prowlarr:
+    image: lscr.io/linuxserver/prowlarr:latest
+    container_name: prowlarr
+    network_mode: service:gluetun
+    depends_on:
+      gluetun:
+        condition: service_healthy
+        restart: true
+    environment:
+      - PUID=${PUID}
+      - PGID=${PGID}
+      - UMASK=002
+      - TZ=${TZ}
+    volumes:
+      - prowlarr_volume:/config
+    restart: unless-stopped
+
+  # ============================================================
+  # FLARESOLVERR — Cloudflare Bypass (runs through Gluetun VPN)
+  # Some indexers use Cloudflare protection. This gets around it.
+  # ============================================================
+  flaresolverr:
+    image: ghcr.io/flaresolverr/flaresolverr:latest
+    container_name: flaresolverr
+    network_mode: service:gluetun
+    depends_on:
+      gluetun:
+        condition: service_healthy
+        restart: true
+    volumes:
+      - flaresolverr_volume:/config
+    environment:
+      - LOG_LEVEL=info
+      - TZ=${TZ}
+    restart: unless-stopped
+
+  # ============================================================
+  # RADARR — Movie Manager (NOT behind VPN)
+  # Searches via Prowlarr, sends downloads to qBittorrent,
+  # renames and hard-links completed files to media folder.
+  # ============================================================
+  radarr:
+    image: lscr.io/linuxserver/radarr:latest
+    container_name: radarr
+    environment:
+      - PUID=${PUID}
+      - PGID=${PGID}
+      - UMASK=002
+      - TZ=${TZ}
+    volumes:
+      - radarr_volume:/config
+      - /data:/data
+    ports:
+      - 7878:7878
+    networks:
+      arrnetwork:
+        ipv4_address: ${IP_RADARR}
+    restart: unless-stopped
+
+  # ============================================================
+  # SONARR — TV Show Manager (NOT behind VPN)
+  # Same pattern as Radarr but for TV series.
+  # ============================================================
+  sonarr:
+    image: lscr.io/linuxserver/sonarr:latest
+    container_name: sonarr
+    environment:
+      - PUID=${PUID}
+      - PGID=${PGID}
+      - UMASK=002
+      - TZ=${TZ}
+    volumes:
+      - sonarr_volume:/config
+      - /data:/data
+    ports:
+      - 8989:8989
+    networks:
+      arrnetwork:
+        ipv4_address: ${IP_SONARR}
+    restart: unless-stopped
+
+  # ============================================================
+  # LIDARR — Music Manager (NOT behind VPN)
+  # Optional. Comment out if you don't need music automation.
+  # ============================================================
+  lidarr:
+    image: lscr.io/linuxserver/lidarr:latest
+    container_name: lidarr
+    environment:
+      - PUID=${PUID}
+      - PGID=${PGID}
+      - UMASK=002
+      - TZ=${TZ}
+    volumes:
+      - lidarr_volume:/config
+      - /data:/data
+    ports:
+      - 8686:8686
+    networks:
+      arrnetwork:
+        ipv4_address: ${IP_LIDARR}
+    restart: unless-stopped
+
+  # ============================================================
+  # BAZARR — Subtitle Manager (NOT behind VPN)
+  # Automatically downloads subtitles for movies and TV shows.
+  # ============================================================
+  bazarr:
+    image: lscr.io/linuxserver/bazarr:latest
+    container_name: bazarr
+    environment:
+      - PUID=${PUID}
+      - PGID=${PGID}
+      - UMASK=002
+      - TZ=${TZ}
+    volumes:
+      - bazarr_volume:/config
+      - /data:/data
+    ports:
+      - 6767:6767
+    networks:
+      arrnetwork:
+        ipv4_address: ${IP_BAZARR}
+    restart: unless-stopped
+
+  # ============================================================
+  # JELLYFIN — Media Server (NOT behind VPN)
+  # Your personal streaming service. Plays movies, TV, music.
+  # Needs full bandwidth — never put this behind the VPN.
+  # ============================================================
+  jellyfin:
+    image: lscr.io/linuxserver/jellyfin:latest
+    container_name: jellyfin
+    environment:
+      - PUID=${PUID}
+      - PGID=${PGID}
+      - UMASK=002
+      - TZ=${TZ}
+    volumes:
+      - jellyfin_volume:/config
+      - /data/media:/data/media
+    ports:
+      - 8096:8096
+    # Uncomment the lines below to enable hardware transcoding (Intel Quick Sync / VAAPI).
+    # Only works if your system has Intel/AMD integrated graphics (/dev/dri must exist).
+    # If you get an error about /dev/dri not found, leave these commented out.
+    # devices:
+    #   - /dev/dri:/dev/dri
+    networks:
+      arrnetwork:
+        ipv4_address: ${IP_JELLYFIN}
+    restart: unless-stopped
+
+  # ============================================================
+  # SEERR — Request System (NOT behind VPN)
+  # Netflix-like UI for requesting movies and TV shows.
+  # Share this with family — they never need to touch Radarr.
+  #
+  # Seerr is the unified successor to Overseerr and Jellyseerr
+  # (merged under seerr-team). Supports Plex, Jellyfin, and Emby.
+  #
+  # Config uses a NAMED Docker volume (not a bind mount). This is
+  # required: Seerr runs as the `node` user (UID 1000) and a
+  # bind-mounted host folder is created root-owned, causing a
+  # permission-denied crash loop. On Windows/WSL, bind mounts also
+  # corrupt the SQLite DB over SMB. Named volumes fix both cases
+  # (matches upstream Seerr docs).
+  #
+  # Migrating from ./jellyseerr or ./seerr bind mount? See README
+  # troubleshooting "Migrating Seerr config to a named volume".
+  # ============================================================
+  seerr:
+    image: ghcr.io/seerr-team/seerr:v3.0.1
+    init: true
+    container_name: seerr
+    environment:
+      - LOG_LEVEL=info
+      - PUID=${PUID}
+      - PGID=${PGID}
+      - UMASK=002
+      - TZ=${TZ}
+      - PORT=5055
+    volumes:
+      - seerr_volume:/app/config # <--- Needed or will cause a permissions issue. 
+    ports:
+      - 5055:5055
+    healthcheck:
+      test: wget --no-verbose --tries=1 --spider http://localhost:5055/api/v1/settings/public || exit 1
+      start_period: 20s
+      timeout: 3s
+      interval: 15s
+      retries: 3
+    networks:
+      arrnetwork:
+        ipv4_address: ${IP_SEERR}
+    restart: unless-stopped
+
+  listenarr:
+    image: ghcr.io/listenarrs/listenarr:canary
+    container_name: listenarr
+    ports:
+      - "4545:4545"
+    environment:
+      - PUID=${PUID}
+      - PGID=${PGID}
+      - UMASK=002
+      - TZ=${TZ}
+    volumes:
+      - listenarr_volume:/app/config
+      - /data/media/audiobookshelf/books:/audiobooks
+      - /data/torrents/books:/downloads
+    restart: unless-stopped
+    networks:
+      arrnetwork:
+        ipv4_address: ${IP_LIST}
+
+  audiobookshelf:
+    image: ghcr.io/advplyr/audiobookshelf:latest
+    container_name: audiobookshelf
+    ports:
+      - 13378:80
+    environment:
+      - PUID=${PUID}
+      - PGID=${PGID}
+      - UMASK=002
+      - TZ=${TZ}
+    volumes:
+      - /data/media/books/audiobookshelf/books:/audiobooks
+      - /data/media/books/audiobookshelf/podcasts:/podcasts
+      - /data/media/books/audiobookshelf/metadata:/metadata
+      - audiobookshelf_volume:/config
+    restart: unless-stopped
+    networks:
+      arrnetwork:
+        ipv4_address: ${IP_AUDIO}
+  navidrome:
+    image: deluan/navidrome:latest
+    container_name: navidrome
+    ports:
+      - 4533:4533
+    restart: unless-stopped
+    environment:
+      - ND_SCANSCHEDULE=1h
+      - ND_LOGLEVEL=info
+      - ND_SESSIONTIMEOUT=24h
+      - PUID=${PUID}
+      - PGID=${PGID}
+      - UMASK=002
+      - TZ=${TZ}
+    volumes:
+      - navidrome_volume:/data
+      - /data/media/music:/music:ro
+    networks:
+      arrnetwork:
+        ipv4_address: ${IP_NAVI}
+      
+  watchtower:
+    image: containrrr/watchtower
+    container_name: watchtower
+    restart: unless-stopped
+    env_file: .env
+    environment:
+      - DOCKER_API_VERSION=1.44
+      - TZ=${TZ}
+      - PUID:=${PUID} # Reference PUID from .env
+      - PGID=${PGID} # Reference PGID from .env
+      - WATCHTOWER_CLEANUP=${WATCHTOWER_CLEANUP}
+      - WATCHTOWER_INCLUDE_RESTARTING=${WATCHTOWER_INCLUDE_RESTARTING}
+      - WATCHTOWER_ROLLING_RESTARTING=${WATCHTOWER_ROLLING_RESTARTING}
+      - WATCHTOWER_SCHEDULE=${WATCHTOWER_SCHEDULE}
+      - WATCHTOWER_INCLUDE_STOPPED=${WATCHTOWER_INCLUDE_STOPPED}
+      - WATCHTOWER_NOTIFICATIONS=${WATCHTOWER_NOTIFICATIONS}
+      - WATCHTOWER_NOTIFICATIONS_HOSTNAME=${WATCHTOWER_NOTIFICATIONS_HOSTNAME}
+      - WATCHTOWER_NOTIFICATION_EMAIL_FROM=${WATCHTOWER_NOTIFICATION_EMAIL_FROM}
+      - WATCHTOWER_NOTIFICATION_EMAIL_TO=${WATCHTOWER_NOTIFICATION_EMAIL_TO}
+      - WATCHTOWER_NOTIFICATION_EMAIL_SERVER=${WATCHTOWER_NOTIFICATION_EMAIL_SERVER}
+      - WATCHTOWER_NOTIFICATION_EMAIL_SERVER_PORT=${WATCHTOWER_NOTIFICATION_EMAIL_SERVER_PORT}
+      - WATCHTOWER_NOTIFICATION_EMAIL_SERVER_USER=${WATCHTOWER_NOTIFICATION_EMAIL_SERVER_USER}
+      - WATCHTOWER_NOTIFICATION_EMAIL_SERVER_PASSWORD=${WATCHTOWER_NOTIFICATION_EMAIL_SERVER_PASSWORD}
+    security_opt:
+      - no-new-privileges:true
+    volumes:
+      - /etc/timezone:/etc/timezone:ro
+      - /etc/localtime:/etc/localtime:ro
+      - /var/run/docker.sock:/var/run/docker.sock
+      - watchtower_volume:/config
+    networks:
+      arrnetwork:
+        ipv4_address: ${IP_WATCH}
+# Go to the VERY BOTTOM of your file (outside of services) and add this:
+volumes:
+  gluetun_volume:
+  qbittorrent_volume:
+  deunhealth_volume:
+  prowlarr_volume:
+  flaresolverr_volume:
+  radarr_volume:
+  sonarr_volume:
+  lidarr_volume:
+  bazarr_volume:
+  jellyfin_volume:
+  seerr_volume:
+  listenarr_volume:
+  audiobookshelf_volume:
+  navidrome_volume:
+  watchtower_volume:

Ittools/docker-compose.yml

@@ -0,0 +1,20 @@
+services:
+  it-tools:
+    image: 'corentinth/it-tools:latest'
+    ports:
+      - '8150:80'
+    restart: unless-stopped
+    container_name: it-tools
+    networks:
+      - external    
+
+    healthcheck:
+      test: ["CMD", "curl", "-f", "http://localhost:80"]
+      interval: 10s
+      retries: 3
+      timeout: 10s
+      start_period: 30s
+
+networks:
+  external:
+    external: true    # Tells Compose not to create this network.

Mealie/docker-compose.yml

@@ -0,0 +1,43 @@
+services:
+  mealie:
+    image: ghcr.io/mealie-recipes/mealie:latest # Specifies the Mealie Docker i>
+    container_name: mealie                      # Names the container for easier>
+    ports:
+      - "9200:9000"                             # Maps port 9925 on the host to >
+    deploy:
+      resources:
+        limits:
+          memory: 1000M                         # Limits the container to use a >
+    volumes:
+      - /opt/Docker-Deployments/Mealie/data:/app/data/                  # Persists data in>
+      - /opt/Docker-Deployments/Mealie/config/addons_config/mealie/config.yaml:/config/config.yanl
+    environment:
+      - ALLOW_SIGNUP=false                      # Allows new user signups on the>
+      - PUID=1000                               # Sets the user ID for the conta>
+      - PGID=1000                               # Sets the group ID for the cont>
+      - TZ=America/New_York                     # Sets the timezone for the cont>
+      - MAX_WORKERS=1                           # Limits the number of workers t>
+      - WEB_CONCURRENCY=1                       # Sets the concurrency level for>
+      - BASE_URL=mealie.mikemcfetridge.com      # The base URL where Mealie is a>
+      # Email Settings
+      - SMTP_HOST=mail.mmcfetridge.net
+      - SMTP_PORT=465
+      - SMTP_FROM_NAME=miker@mmcfetridge.net
+      - SMTP_AUTH_STRATEGY=TLS
+      - SMTP_FROM_EMAIL=miker@mmcfetridge.net
+      - SMTP_USER=miker@mmcfetridge.net
+      - SMTP_PASSWORD="!Sucyetat123"
+    networks:
+      - external    
+    restart: unless-stopped
+
+    healthcheck:
+      test: ["CMD", "curl", "-f", "http://localhost:9000"]
+      interval: 10s
+      retries: 3
+      timeout: 10s
+      start_period: 30s
+
+networks:
+  external:
+    external: true    # Tells Compose not to create this network      

README.md

@@ -1,2 +1,2 @@
-# Docker-01
+# Docker-Deployments
 

Semaphore/docker-compose.yml

@@ -0,0 +1,51 @@
+volumes:
+  semaphore_data:
+  semaphore_config:
+  semaphore_tmp:
+  
+services:
+  semaphore:
+    image: semaphoreui/semaphore:latest
+    container_name: semaphore
+    ports:
+      - "3020:3020" # Web UI accessed via port 3020
+    environment:
+      - PUID=1000 
+      - PGID=1000 
+      - SEMAPHORE_DB_DIALECT=sqlite
+      - SEMAPHORE_ADMIN_PASSWORD=Dy7zxAyDqdYN443g4pI3 # Change this on first boot!
+      - SEMAPHORE_ADMIN_NAME=Mike McFetridge
+      - SEMAPHORE_ADMIN_EMAIL=mmcfetridg@aol.com
+      - SEMAPHORE_ADMIN=mmcfetridge
+      # Point Semaphore to our secure local Docker Proxy instead of raw socket
+      - DOCKER_HOST=tcp://docker_proxy:2375
+      - SEMAPHORE_PORT=3020
+      - ANSIBLE_HOST_KEY_CHECKING=False
+      - SEMAPHORE_ACCESS_KEY_ENCRYPTION=mrmKv7EztqRCnlGo34IvlvoilXqvDKYnFIWX2lg+hZc=
+      # Email Configuration
+      - SEMAPHORE_EMAIL_ALERT=True
+      - SEMAPHORE_EMAIL_HOST=mail.mmcfetridge.net
+      - SEMAPHORE_EMAIL_PORT=465
+      - SEMAPHORE_EMAIL_SENDER=miker@mmcfetridge.net
+      - SEMAPHORE_EMAIL_USERNAME=miker@mmcfetridge.net
+      - SEMAPHORE_EMAIL_PASSWORD="!Sucyetat123"
+      - SEMAPHORE_EMAIL_SECURE=true
+      - SEMAPHORE_EMAIL_TLS=true
+    volumes:
+      - semaphore_data:/var/lib/semaphore
+      - semaphore_config:/etc/semaphore
+      - semaphore_tmp:/tmp/semaphore
+    networks:
+      - external
+    restart: unless-stopped
+
+    healthcheck:
+      test: ["CMD", "curl", "-f", "http://localhost:3020"]
+      interval: 10s
+      retries: 3
+      timeout: 10s
+      start_period: 30s
+      
+networks:
+  external:
+    external: true    # Tells Compose not to create this network

Sencho/docker-compose.yml

@@ -0,0 +1,17 @@
+services:
+  sencho:
+    image: saelix/sencho:latest
+    container_name: sencho
+    restart: unless-stopped
+    ports:
+      - "1852:1852"
+    volumes:
+      - /var/run/docker.sock:/var/run/docker.sock
+      - /opt/Docker-Deployments/Sencho/data:/app/data
+      # Change this line so the container path matches the host path:
+      - /opt/Docker-Deployments:/opt/Docker-Deployments
+    environment:
+      - COMPOSE_DIR=/opt/Docker-Deployments
+      - DATA_DIR=/app/data
+      
+      

Watchtower/.env

@@ -0,0 +1,17 @@
+TZ=America/New_York
+WATCHTOWER_CLEANUP=true
+WATCHTOWER_INCLUDE_RESTARTING=true
+WATCHTOWER_ROLLING_RESTARTING=true
+WATCHTOWER_SCHEDULE=0 0 4 * * *
+WATCHTOWER_INCLUDE_STOPPED=true
+WATCHTOWER_NOTIFICATIONS=email
+WATCHTOWER_NOTIFICATIONS_HOSTNAME=Docker-Deply  # Add Server Name or IP Address
+WATCHTOWER_NOTIFICATION_EMAIL_FROM=miker@mmcfetridge.net
+WATCHTOWER_NOTIFICATION_EMAIL_TO=miker@mmcfetridge.net
+WATCHTOWER_NOTIFICATION_EMAIL_SERVER=mail.mmcfetridge.net
+WATCHTOWER_NOTIFICATION_EMAIL_SERVER_PORT=465
+WATCHTOWER_NOTIFICATION_EMAIL_SERVER_USER=miker@mmcfetridge.net
+WATCHTOWER_NOTIFICATION_EMAIL_SERVER_PASSWORD=!Sucyetat123
+WATCHTOWER_NOTIFICATION_EMAIL_DELAY=2
+PUID=1000
+PGID=1000

Watchtower/docker-compose.yml

@@ -0,0 +1,36 @@
+services:
+  watchtower:
+    image: containrrr/watchtower
+    container_name: watchtower
+    restart: unless-stopped
+    env_file: .env
+    environment:
+      - DOCKER_API_VERSION=1.44
+      - TZ=America/New_York
+      - PUID:=1000 # Reference PUID from .env
+      - PGID=1000 # Reference PGID from .env
+      - WATCHTOWER_CLEANUP=true
+      - WATCHTOWER_INCLUDE_RESTARTING=true
+      - WATCHTOWER_ROLLING_RESTARTING=true
+      - WATCHTOWER_SCHEDULE=0 0 4 * * *
+      - WATCHTOWER_INCLUDE_STOPPED=true
+      - WATCHTOWER_NOTIFICATIONS=email
+      - WATCHTOWER_NOTIFICATIONS_HOSTNAME=Docker-Deployment  # Add Server Name or IP Address
+      - WATCHTOWER_NOTIFICATION_EMAIL_FROM=miker@mmcfetridge.net
+      - WATCHTOWER_NOTIFICATION_EMAIL_TO=miker@mmcfetridge.net
+      - WATCHTOWER_NOTIFICATION_EMAIL_SERVER=mail.mmcfetridge.net
+      - WATCHTOWER_NOTIFICATION_EMAIL_SERVER_PORT=465
+      - WATCHTOWER_NOTIFICATION_EMAIL_SERVER_USER=miker@mmcfetridge.net
+      - WATCHTOWER_NOTIFICATION_EMAIL_SERVER_PASSWORD=!Sucyetat123
+      - WATCHTOWER_NOTIFICATION_EMAIL_DELAY=2
+    security_opt:
+      - no-new-privileges:true
+    volumes:
+      - /etc/timezone:/etc/timezone:ro
+      - /etc/localtime:/etc/localtime:ro
+      - /var/run/docker.sock:/var/run/docker.sock
+    networks:
+      - external
+networks:
+  external:
+    external: true    # Tells Compose not to create this network

deploy-Template.yml

@@ -0,0 +1,48 @@
+name: Validate and Deploy Homelab
+
+on:
+  push:
+    branches: [ "main" ]
+
+jobs:
+  test-and-deploy:
+    runs-on: ubuntu-latest
+    
+    steps:
+      - name: Checkout Repository Code
+        uses: actions/checkout@v4
+
+      - name: Verify Compose File Validity
+        env:
+          DB_ROOT_PASSWORD: ${{ secrets.MYSQL_ROOT_PASSWORD }}
+          DB_PASSWORD: ${{ secrets.MYSQL_PASSWORD }}
+        run: docker compose config
+
+      # --- DEPLOYMENT PHASE ---
+      
+      - name: Set up SSH Private Key
+        run: |
+          mkdir -p ~/.ssh
+          echo "${{ secrets.DEPLOY_SSH_KEY }}" > ~/.ssh/id_ed25519
+          chmod 600 ~/.ssh/id_ed25519
+          # Scan the host key to prevent SSH hanging on a manual confirmation prompt
+          ssh-keyscan -H ${{ secrets.DEPLOY_HOST }} >> ~/.ssh/known_hosts
+
+      - name: Create Remote Docker Context
+        run: |
+          # Define a remote endpoint pointing to your live server over SSH
+          docker context create homelab-target \
+            --docker "host=ssh://${{ secrets.DEPLOY_USER }}@${{ secrets.DEPLOY_HOST }}"
+
+      - name: Deploy Containers to Live Server
+        env:
+          # Pass your production secrets to the live deployment step
+          DB_ROOT_PASSWORD: ${{ secrets.MYSQL_ROOT_PASSWORD }}
+          DB_PASSWORD: ${{ secrets.MYSQL_PASSWORD }}
+        run: |
+          echo "Switching Docker context to live server..."
+          docker context use homelab-target
+          
+          echo "Pulling latest images and starting services remotely..."
+          # The --project-directory . flag ensures it reads the docker-compose file fetched by Git
+          docker compose --project-directory . up -d --remove-orphans