migrate

2026-07-20 09:23:01 -04:00
parent 9451342bc8
commit e29203f374
10 changed files with 827 additions and 1 deletions
@@ -0,0 +1,150 @@
+# ============================================================
+# Tom Spark's ARR Stack — Environment Configuration
+# https://github.com/loponai/arrstack
+#
+# INSTRUCTIONS:
+#   1. Copy this file:  cp .env.example .env
+#   2. Fill in your VPN credentials below
+#   3. Adjust timezone and user IDs if needed
+#   4. Run:  docker compose up -d
+# ============================================================
+
+# ============================================================
+# SYSTEM SETTINGS
+# ============================================================
+
+# Your timezone (list: https://en.wikipedia.org/wiki/List_of_tz_database_time_zones)
+TZ=America/New_York
+
+# Your Linux user/group ID. Find yours with: id
+# Most systems default to 1000. If yours is different, change these.
+PUID=1000
+PGID=1000
+
+# ============================================================
+# VPN SETTINGS — Pick your provider and fill in credentials
+# Full provider list: https://github.com/qdm12/gluetun-wiki/tree/main/setup/providers
+#
+# IMPORTANT: VPN credentials are NOT your login email/password!
+# You need service credentials from your VPN provider's manual
+# setup or API section. See the provider examples at the bottom of this file.
+# ============================================================
+
+# Your VPN provider (surfshark, nordvpn, protonvpn, airvpn, mullvad, private internet access, windscribe, etc.)
+VPN_SERVICE_PROVIDER=airvpn
+
+# Protocol: wireguard (recommended, faster) or openvpn
+VPN_TYPE=wireguard
+
+# --- WIREGUARD CREDENTIALS ---
+# For Surfshark: go to https://my.surfshark.com/vpn/manual-setup/main → WireGuard
+# For other providers: see the examples at the bottom of this file
+WIREGUARD_PRIVATE_KEY=eDgf3GPFy2ltgx2RkD/Vx5wKZ4dVi28YbQmSJOrbWmk=
+WIREGUARD_ADDRESSES=10.175.23.30
+# Only needed for some providers (AirVPN). Leave blank if not required.
+# WIREGUARD_PUBLIC_KEY=
+WIREGUARD_PRESHARED_KEY=+0+hrSdzRUxKDNk1Q37PNmNJ2jsj2EzF45JtbZad4lI=
+# --- OPENVPN CREDENTIALS ---
+# Only needed if VPN_TYPE=openvpn. Leave blank if using WireGuard.
+# OPENVPN_USER=
+# OPENVPN_PASSWORD=
+
+# --- SERVER SELECTION ---
+# Pick a country close to you for best speeds
+SERVER_COUNTRIES=Canada
+
+# --- PORT FORWARDING ---
+# Supported by: ProtonVPN, AirVPN, PIA. Can help with upload speeds and seeding.
+# Not required for downloading. Most users don't need this.
+# Set to "on" if your provider supports it, leave blank otherwise (Surfshark, NordVPN, etc.).
+#VPN_PORT_FORWARDING=
+# If your provider requires manually specifying a port (e.g. AirVPN):
+FIREWALL_VPN_INPUT_PORTS=29261
+
+# ============================================================
+# NETWORK — Static IPs for each service
+# You shouldn't need to change these unless you have a conflict.
+# ============================================================
+IP_GLUETUN=172.39.0.2
+IP_RADARR=172.39.0.3
+IP_SONARR=172.39.0.4
+IP_LIDARR=172.39.0.5
+IP_BAZARR=172.39.0.6
+IP_JELLYFIN=172.39.0.7
+IP_SEERR=172.39.0.8
+IP_AUDIO=172.39.0.9
+IP_NAVI=172.39.0.10
+IP_LIST=172.39.0.11
+IP_WATCH=172.39.0.12
+# ============================================================
+# PROVIDER-SPECIFIC EXAMPLES
+# Uncomment and fill in the section for your VPN provider.
+# ============================================================
+
+# --- NORDVPN ---
+# 1. Go to: https://my.nordaccount.com/dashboard/nordvpn/manual-configuration/
+# 2. Generate a WireGuard private key (NordLynx)
+# 3. Paste the private key below
+# VPN_SERVICE_PROVIDER=nordvpn
+# VPN_TYPE=wireguard
+# WIREGUARD_PRIVATE_KEY=your_nordvpn_private_key_here
+# WIREGUARD_ADDRESSES=10.5.0.2/16
+# SERVER_COUNTRIES=United States
+# --- PROTONVPN ---
+# 1. Go to: https://account.protonvpn.com/ → Downloads → WireGuard configuration
+# 2. Generate a config, open the file, copy the PrivateKey and Address
+# 3. Port forwarding is supported on paid plans
+# VPN_SERVICE_PROVIDER=protonvpn
+# VPN_TYPE=wireguard
+# WIREGUARD_PRIVATE_KEY=your_proton_private_key_here
+# WIREGUARD_ADDRESSES=10.2.0.2/32
+# SERVER_COUNTRIES=United States
+# VPN_PORT_FORWARDING=on
+
+# --- SURFSHARK ---
+# 1. Go to: https://my.surfshark.com/vpn/manual-setup/main
+# 2. Get WireGuard credentials
+# VPN_SERVICE_PROVIDER=surfshark
+# VPN_TYPE=wireguard
+# WIREGUARD_PRIVATE_KEY=your_surfshark_private_key_here
+# WIREGUARD_ADDRESSES=10.14.0.2/16
+# SERVER_COUNTRIES=United States
+
+# --- AIRVPN ---
+# 1. Go to: https://airvpn.org/ → Client Area → Config Generator
+# 2. Select Linux → WireGuard → pick a server → Generate
+# 3. Copy all keys and the assigned IP
+# VPN_SERVICE_PROVIDER=airvpn
+# VPN_TYPE=wireguard
+# WIREGUARD_PRIVATE_KEY=your_airvpn_private_key_here
+# WIREGUARD_PUBLIC_KEY=your_airvpn_public_key_here
+# WIREGUARD_PRESHARED_KEY=your_airvpn_preshared_key_here
+# WIREGUARD_ADDRESSES=your_assigned_ip/32
+# FIREWALL_VPN_INPUT_PORTS=your_forwarded_port
+# VPN_PORT_FORWARDING=on
+
+# --- MULLVAD ---
+# 1. Go to: https://mullvad.net/en/account → WireGuard configuration
+# VPN_SERVICE_PROVIDER=mullvad
+# VPN_TYPE=wireguard
+# WIREGUARD_PRIVATE_KEY=your_mullvad_private_key_here
+# WIREGUARD_ADDRESSES=your_assigned_ip/32
+# SERVER_COUNTRIES=United States
+
+# --- Watchtower ---
+WATCHTOWER_CLEANUP=true
+WATCHTOWER_INCLUDE_RESTARTING=true
+WATCHTOWER_ROLLING_RESTARTING=true
+WATCHTOWER_SCHEDULE=0 0 4 * * *
+WATCHTOWER_INCLUDE_STOPPED=true
+WATCHTOWER_NOTIFICATIONS=email
+WATCHTOWER_NOTIFICATIONS_HOSTNAME=Docker-Deply  # Add Server Name or IP Address
+WATCHTOWER_NOTIFICATION_EMAIL_FROM=miker@mmcfetridge.net
+WATCHTOWER_NOTIFICATION_EMAIL_TO=miker@mmcfetridge.net
+WATCHTOWER_NOTIFICATION_EMAIL_SERVER=mail.mmcfetridge.net
+WATCHTOWER_NOTIFICATION_EMAIL_SERVER_PORT=465
+WATCHTOWER_NOTIFICATION_EMAIL_SERVER_USER=miker@mmcfetridge.net
+WATCHTOWER_NOTIFICATION_EMAIL_SERVER_PASSWORD=!Sucyetat123
+WATCHTOWER_NOTIFICATION_EMAIL_DELAY=2
+PUID=1000
+PGID=1000