# ============================================================
# Tom Spark's ARR Stack — Environment Configuration
# https://github.com/loponai/arrstack
#
# INSTRUCTIONS:
#   1. Copy this file:  cp .env.example .env
#   2. Fill in your VPN credentials below
#   3. Adjust timezone and user IDs if needed
#   4. Run:  docker compose up -d
# ============================================================

# ============================================================
# SYSTEM SETTINGS
# ============================================================

# Your timezone (list: https://en.wikipedia.org/wiki/List_of_tz_database_time_zones)
TZ=America/New_York

# Your Linux user/group ID. Find yours with: id
# Most systems default to 1000. If yours is different, change these.
PUID=1000
PGID=1000

# ============================================================
# VPN SETTINGS — Pick your provider and fill in credentials
# Full provider list: https://github.com/qdm12/gluetun-wiki/tree/main/setup/providers
#
# IMPORTANT: VPN credentials are NOT your login email/password!
# You need service credentials from your VPN provider's manual
# setup or API section. See the provider examples at the bottom of this file.
# ============================================================

# Your VPN provider (surfshark, nordvpn, protonvpn, airvpn, mullvad, private internet access, windscribe, etc.)
VPN_SERVICE_PROVIDER=airvpn

# Protocol: wireguard (recommended, faster) or openvpn
VPN_TYPE=wireguard

# --- WIREGUARD CREDENTIALS ---
# For Surfshark: go to https://my.surfshark.com/vpn/manual-setup/main → WireGuard
# For other providers: see the examples at the bottom of this file
WIREGUARD_PRIVATE_KEY=eDgf3GPFy2ltgx2RkD/Vx5wKZ4dVi28YbQmSJOrbWmk=
WIREGUARD_ADDRESSES=10.175.23.30
# Only needed for some providers (AirVPN). Leave blank if not required.
# WIREGUARD_PUBLIC_KEY=
WIREGUARD_PRESHARED_KEY=+0+hrSdzRUxKDNk1Q37PNmNJ2jsj2EzF45JtbZad4lI=
# --- OPENVPN CREDENTIALS ---
# Only needed if VPN_TYPE=openvpn. Leave blank if using WireGuard.
# OPENVPN_USER=
# OPENVPN_PASSWORD=

# --- SERVER SELECTION ---
# Pick a country close to you for best speeds
SERVER_COUNTRIES=Canada

# --- PORT FORWARDING ---
# Supported by: ProtonVPN, AirVPN, PIA. Can help with upload speeds and seeding.
# Not required for downloading. Most users don't need this.
# Set to "on" if your provider supports it, leave blank otherwise (Surfshark, NordVPN, etc.).
#VPN_PORT_FORWARDING=
# If your provider requires manually specifying a port (e.g. AirVPN):
FIREWALL_VPN_INPUT_PORTS=29261

# ============================================================
# NETWORK — Static IPs for each service
# You shouldn't need to change these unless you have a conflict.
# ============================================================
IP_GLUETUN=172.39.0.2
IP_RADARR=172.39.0.3
IP_SONARR=172.39.0.4
IP_LIDARR=172.39.0.5
IP_BAZARR=172.39.0.6
IP_JELLYFIN=172.39.0.7
IP_SEERR=172.39.0.8
IP_AUDIO=172.39.0.9
IP_NAVI=172.39.0.10
IP_LIST=172.39.0.11
IP_WATCH=172.39.0.12
# ============================================================
# PROVIDER-SPECIFIC EXAMPLES
# Uncomment and fill in the section for your VPN provider.
# ============================================================

# --- NORDVPN ---
# 1. Go to: https://my.nordaccount.com/dashboard/nordvpn/manual-configuration/
# 2. Generate a WireGuard private key (NordLynx)
# 3. Paste the private key below
# VPN_SERVICE_PROVIDER=nordvpn
# VPN_TYPE=wireguard
# WIREGUARD_PRIVATE_KEY=your_nordvpn_private_key_here
# WIREGUARD_ADDRESSES=10.5.0.2/16
# SERVER_COUNTRIES=United States
# --- PROTONVPN ---
# 1. Go to: https://account.protonvpn.com/ → Downloads → WireGuard configuration
# 2. Generate a config, open the file, copy the PrivateKey and Address
# 3. Port forwarding is supported on paid plans
# VPN_SERVICE_PROVIDER=protonvpn
# VPN_TYPE=wireguard
# WIREGUARD_PRIVATE_KEY=your_proton_private_key_here
# WIREGUARD_ADDRESSES=10.2.0.2/32
# SERVER_COUNTRIES=United States
# VPN_PORT_FORWARDING=on

# --- SURFSHARK ---
# 1. Go to: https://my.surfshark.com/vpn/manual-setup/main
# 2. Get WireGuard credentials
# VPN_SERVICE_PROVIDER=surfshark
# VPN_TYPE=wireguard
# WIREGUARD_PRIVATE_KEY=your_surfshark_private_key_here
# WIREGUARD_ADDRESSES=10.14.0.2/16
# SERVER_COUNTRIES=United States

# --- AIRVPN ---
# 1. Go to: https://airvpn.org/ → Client Area → Config Generator
# 2. Select Linux → WireGuard → pick a server → Generate
# 3. Copy all keys and the assigned IP
# VPN_SERVICE_PROVIDER=airvpn
# VPN_TYPE=wireguard
# WIREGUARD_PRIVATE_KEY=your_airvpn_private_key_here
# WIREGUARD_PUBLIC_KEY=your_airvpn_public_key_here
# WIREGUARD_PRESHARED_KEY=your_airvpn_preshared_key_here
# WIREGUARD_ADDRESSES=your_assigned_ip/32
# FIREWALL_VPN_INPUT_PORTS=your_forwarded_port
# VPN_PORT_FORWARDING=on

# --- MULLVAD ---
# 1. Go to: https://mullvad.net/en/account → WireGuard configuration
# VPN_SERVICE_PROVIDER=mullvad
# VPN_TYPE=wireguard
# WIREGUARD_PRIVATE_KEY=your_mullvad_private_key_here
# WIREGUARD_ADDRESSES=your_assigned_ip/32
# SERVER_COUNTRIES=United States

# --- Watchtower ---
WATCHTOWER_CLEANUP=true
WATCHTOWER_INCLUDE_RESTARTING=true
WATCHTOWER_ROLLING_RESTARTING=true
WATCHTOWER_SCHEDULE=0 0 4 * * *
WATCHTOWER_INCLUDE_STOPPED=true
WATCHTOWER_NOTIFICATIONS=email
WATCHTOWER_NOTIFICATIONS_HOSTNAME=Docker-Deply  # Add Server Name or IP Address
WATCHTOWER_NOTIFICATION_EMAIL_FROM=miker@mmcfetridge.net
WATCHTOWER_NOTIFICATION_EMAIL_TO=miker@mmcfetridge.net
WATCHTOWER_NOTIFICATION_EMAIL_SERVER=mail.mmcfetridge.net
WATCHTOWER_NOTIFICATION_EMAIL_SERVER_PORT=465
WATCHTOWER_NOTIFICATION_EMAIL_SERVER_USER=miker@mmcfetridge.net
WATCHTOWER_NOTIFICATION_EMAIL_SERVER_PASSWORD=!Sucyetat123
WATCHTOWER_NOTIFICATION_EMAIL_DELAY=2
PUID=1000
PGID=1000